What are the precautions for installing U-bolts?
Release time:
2024-05-17 09:44
Source:
In order to ensure the correct installation of the U-bolt, the relevant personnel need to strictly follow the following five steps:
✨. Remove the nut
If the thread of the U-bolt and the nut are joined together, the nut needs to be removed from both sides of the bolt.
✨ 2. Place the U-bolts
Place U-bolts on pipes for easy connection of beams or supports.
✨ 3. Check the holes
Drill holes into the support structure and, if the beam has been drilled through, ensure that its protective coating is not damaged. Cracks in the coating may cause rust around the holes, so before installing U-bolts, relevant personnel should check the holes and trim the rusty parts of the holes in time.
✨ Four, bolt perforation
Push two bolts through the holes and screw nuts on both ends of the U-bolts.
✨ Five. Tighten the nut
The nut needs to be placed on the restraint device, and unlike the guide device, the relevant personnel must tighten the nut on the bottom side. Finally, use a power tool or wrench to tighten the nut to lock the U-bolt into place.
More news
China's 304 stainless steel prices weaken on dampened sentiment
The positive sentiment that had earlier buoyed China's stainless steel market waned overMarch 14-21, with futures prices weakening and exerting downward pressure on austenitic stainless prices, particularly for 304 stainless steel cold-rolled coil (CRC), according to Mysteel Global.
Daily steel market: black futures rise, 5 steel mills raise prices, steel prices run strong.
On September 11, the domestic steel market rose, and the ex-factory tax-inclusive price of Tangshan Qiananpu square billet rose 40 to 2830 yuan/ton. In terms of transactions, driven by the rise of the period snail, the market price as a whole followed the rise, the transaction volume.